PRDs (pressure-relief devices)

In addition to cylinders, Luxfer offers a superior line of valves and PRDs (pressure relief devices), including complete cylinder kits for AF applications. Our high-flow PRDs allow a faster release in case of an emergency.

Key features and benefits:

• An extremely lightweight and compact valve with a 6061-T6 aluminum alloy body – up to 50% lighter than similar products.
• Optional studs: fixed or indexable 370 degrees.
• Low-torque for ease of use – up to 66% lower than similar products.
• Includes Luxfer’s high-flow PRD (direct or vented). High-flow in and out (Cv = 2.0; flow equi. =0.277”/7.04mm orifice).

Additional features and benefits:

• Optional excess-flow valve.
• Available rig pin to lock lever in closed position.
• Very low leakage (-50C O-rings).
• Burst: 20,000 psi (1380 bar), 25% higher than other similar products on the market (higher burst ratings available with lower-flow PRDs).
• 200-bar, 250-bar, 350-bar and 450-bar ratings.
• 10,000 cycle life (ISO 15500-4, 250 bar).
• Optional port for remote PRDs, gauges and sensors.
• Compliance to CGA S1.1, NGV3.1, ECE R110 and ISO 15500.
• Patent pending.

End-plug PRD

Features and benefits:

• Extremely lightweight products achieved by using 6061-T6 aluminum alloy body (only 0.23 pounds).
• Very low profile to maximize space (0.51 inches).
• Available as axial and radial end plugs.
• Very low leakage (-50C O-rings).

End plug

Features and benefits:

• Lightweight 6061-T6 aluminum design.
• Low profile.
• Very low leakage (-50C O-rings).

Neck block mounts

For G-Stor Pro (Type 3) and G-Stor Go (Type 4) cylinders

Various mounting methods may be used with Luxfer cylinders. The mounting method and appropriate mounting hardware are often specified by the fuel-system manufacturer and may be supplied by Luxfer. Refer to applicable instructions and specifications provided by the fuel-system manufacturer or cylinder manufacturer before attempting to mount cylinders.

Luxfer’s 6061-T6 aluminum alloy neck-mount blocks are designed to allow cylinders to expand horizontally while being filled to full pressure.

Features and benefits:

• Lightweight and corrosion-resistant.
• Allows for cylinder expansion under high pressure.
• Easy to install.

Strap mounts

For G-Stor Go (Type 4) cylinders

These carbon steel brackets were specially designed for Luxfer G-Stor Go cylinders to avoid product damage as cylinders expand while being filled to full pressure.

Features and benefits:

• Strong carbon steel material coated for corrosion protection.
• Specially designed for G-Stor Go 22-inch product range to allow for cylinder expansion without compromising cylinder integrity.
• Easy to install.
• Designed and manufactured to meet NFPA 52 G-loading requirements.